+91 9029253570 / +91 9869755546

Monel 400/ K500 Flanges

DIN 2.4375 Reducing Flanges, ASTM B564 Monel 400 Spectacle Blind Flanges, DIN 2.4360 Forging Facing Flanges, Monel Alloy K500 Weld Neck Flanges A/ B, DIN 2.4375 Ring Type Joint Flanges.

About Monel 400/ K500 Flanges

A nickel-based alloy called Monel has long been regarded for its excellent mechanical characteristics, high tensile strength and resistance to corrosion. The flanges made of Monel 400 that comply with ANSI B 16.5 are used in systems that frequently need to be isolated from other installations. UNS N04400/ N05500 Monel Flanges uses power generation, condensers, heat exchangers, and pharmaceutical equipment. The threaded Flange of this grade is thoroughly penetrated by the welding process and attached to the pipe or fitting. All pressures may be utilized with these flanges, which are offered in a full-size range. They can be saved for use in swiftly corroding or eroding systems. Consumers may find the utilization of Monel 400 Flanges in chemical processing machinery, maritime fittings and bolts, crude petroleum stills, gasoline, and freshwater tanks. These flanges are also utilized in various domestic and commercial applications, such as automotive headers, food manufacturing lines, and mechanical parts. 

Features of Monel 400/K500 Flanges :

  • While the corrosion resistance of the UNS N05500 flange is on par with that of commercially pure nickel, the alloy is less costly and considerably simpler to deal with.
  • DIN 2.4360 and DIN 2.4375 flanges are frequently used in environments where machinery is continuously in touch with substances like salt water, oil, or de-aerated acids.
  • Monel flange is a fail-safe material for any equipment that must endure corrosive substances on the inside or outside.
  • The most popular metal flange for uses like boiler feed water heaters and other heat exchangers is Monel 400 since it also has a greater maximum operating temperature than a nickel.
  • A solid-solution alloy called UNS N04400 comprises components including nickel and copper. Only the cold working procedure can harden these Flange.
  • The excellent strength and toughness of the Monel Alloy 400 Flanges throughout a wide temperature range is an advantage of employing them.
  • This Flange is additionally resistant to a variety of corrosive conditions. Using most traditional welding processes, it is possible to fuse various Monel Flange Pressure Rating metals or even metals that are not identified.
  • Except for having higher tensile strength and hardness, Monel K500 Blind Flanges and Monel 400 Alloy have comparable levels of corrosion resistance.
  • Monel Alloy K500 becomes stronger by including materials like titanium and aluminium and adjusting the heat treatment cycles.
  • Solution and mechanical hardening, followed by a procedure with age hardening, are all possible heat treatments for Monel 500. Age hardening in Monel 500 is attributed to the use of titanium and aluminium.
  • Solution annealing is done for hot-finished Monel K500 Flanges at 1800 F. The treatment temperature for cold-finished items is 1900°F.

UNS N04400 Loose Flanges Manufacturer, K500 Monel Alloy Weldneck Flanges Exporter, DIN 2.4360 RTJ Flanges Stockist, Monel Alloy 400 Blind Flange Stockist.

Specification of Monel 400/ K500 Flanges

SpecificationASTM B564 / ASME SB564
Dimension StandardANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
StandardANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Size1/2" (15 NB) to 48" (1200NB)
Class / Pressure150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Flange Face TypeFlate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
DIN FlangesDIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673.
JIS FlangesJIS B2220 5K, JIS B2220 10K, JIS B2220 16K, JIS B2220 20K
BS FlangesBS4504 PN 6, BS 4504 PN 10, BS4504 PN 16, BS4504 PN 25, BS4504 PN 40, BS 4504 PN 64, BS 4504 PN 100, BS 4504 PN 160, BS 4504 PN 250, BS 10, BS Table D, BS Table E, BS Table F, BS Table H.

Ready stock of Flanges available for Monel 400/ K500 Flanges

Equivalent Grades of Monel 400/ K500 Flanges

STANDARDWERKSTOFF NR.UNSJISBSGOSTAFNOREN
Monel 4002.4360N04400NW 4400NA 13МНЖМц 28-2,5-1,5NU-30MNiCu30Fe
Monel K5002.4375N05500-----

Chemical Composition of Monel 400/ K500 Flanges

GradeNiFeCMnSiCuAlTiS
40063.0- 70.00 max2.50 max0.3 max2.00 max0.50 maxRemainder--0.024 max
K50063.0 min05 - 20.25 max1.5 max0.5 max27.0 - 33.02.3 - 3.150.35 - 0.850.010 max

Mechanical Properties of Monel 400/ K500 Flanges

ElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
Monel 4008.8 g/cm31350 °C (2460 °F)Psi – 80,000 , MPa – 550Psi – 35,000 , MPa – 24040 %
Monel K5008.44 g/cm31350 °C (2460 °F)Psi – 160000 , MPa – 1100Psi – 115000 , MPa – 79020 %

Other Types of Flanges of Monel 400/ K500 Flanges

Dimensions Standard Of Monel 400/ K500 Flanges

Nominal SizeOutside Diameter
(OD)
Min. Thickness
(T)
RF Dia.
(R)
No. of Bolt HolesDiameter of HolesBolt Circle
(BC)
SO Bore ID
(SB)
WN Bore ID
(WB)
Dia. Hub Base
(HB)
Dia. of Hub Top
(HT)
SO LTH
(SL)
WN LTH
(WL)
123.500.381.3840.622.380.880.621.190.840.561.81
343.880.441.6940.622.751.090.821.501.050.562.00
14.250.502.0040.623.121.361.051.941.320.622.12
1144.620.562.5040.623.501.701.382.311.660.752.19
1125.000.622.8840.623.881.951.612.561.900.812.38
26.000.693.6240.754.752.442.073.062.380.942.44
2127.000.814.1240.755.502.942.473.562.881.062.69
37.500.885.0040.756.003.573.074.253.501.122.69
3128.500.885.5080.757.004.073.554.814.001.192.75
49.000.886.1980.757.504.574.035.314.501.252.94
510.000.887.3180.888.505.665.056.445.561.383.44
611.000.948.5080.889.506.726.077.566.631.503.44
813.501.0610.6280.8811.758.727.989.698.631.693.94
1016.001.1212.75121.0014.2510.8810.0212.0010.751.883.94
1219.001.1915.00121.0017.0012.8812.0014.3812.752.124.44
1421.001.3116.25121.1218.7514.1413.2515.7514.002.194.94
1623.501.3818.50161.1221.2516.1615.2518.0016.002.444.94
1825.001.5021.00161.2522.7518.1817.2519.8818.002.625.44
2027.501.6223.00201.2525.0020.2019.2522.0020.002.815.62
2229.501.7525.25201.3827.2522.2221.2524.2522.003.075.82
2432.001.8127.25201.3829.5024.2523.2526.1224.003.195.94

Size Of Monel 400/ K500 Flanges

Nom. Pipe SizeoT1RxNo.2/Dia. of HolesBolt Circle Dia.L21HB23LBrL34B3D
1/23.500.441.381.194-0.622.381.880.840.620.620.880.120.620.900.38
3/43.880.501.691.504-0.622.752.061.050.820.621.090.120.621.110.44
14.250.562.001.944-0.623.122.191.321.050.691.360.120.691.380.50
1-1/44.620.622.502.314-0.623.502.251.661.380.811.700.190.811.720.56
1-1/25.000.682.882.564-0.623.882.441.901.610.881.950.250.881.970.62
26.000.753.623.064-0.754.752.502.382.071.002.440.311.002.460.69
2-1/27.000.884.123.564-0.755.502.752.882.471.122.940.311.122.970.75
37.500.945.004.254-0.756.002.753.503.071.193.570.381.193.600.81
3-1/28.500.945.504.818-0.757.002.814.003.551.254.070.381.254.100.88
49.000.946.195.318-0.757.503.004.504.031.314.570.441.314.600.94
510.000.947.316.448-0.888.503.505.565.051.445.660.441.445.690.94
611.001.008.507.568-0.889.503.506.636.071.566.720.501.566.751.06
813.501.1210.629.698-0.8811.754.008.637.981.758.720.501.758.751.25
1016.001.1912.7512.0012-1.0014.254.0010.7510.021.9410.880.501.9410.921.31
1219.001.2515.0014.3812-1.0017.004.5012.7512.002.1912.880.502.1912.921.56
1421.001.3816.2515.7512-1.1218.755.0014.0013.252.2514.140.503.1214.181.63
1623.501.4418.5018.0016-1.1221.255.0016.0015.252.5016.160.503.4416.191.75
1825.001.5621.0019.8816-1.2522.755.5018.0017.252.6918.180.503.8118.201.94
2027.501.6923.0022.0020-1.2525.005.6920.0019.252.8820.200.504.0620.252.13
2229.501.8125.2524.2520-1.3827.255.8822.0021.253.1322.220.504.2522.252.38
2432.001.8827.2526.1220-1.3829.506.0024.0023.253.2524.250.504.3824.252.50

Weight Chart Of Monel 400/ K500 Flanges

Standard Of FlangesClass Of FlangesDiameter Of FlangesDiameter Of Bolt CircleBolts NumberSize Of BoltBolt Hole Diameter
AS4087 FlangesPN14 Flanges95674M1214
AS 2129 FlangeTable C Flanges956741314
Table D Flanges956741314
Table E Flanges956741314
Table F Flanges956741314
Table H Flanges1148341617
Table J Flanges1148341617
ANSI B16.5 FlangesANSI 150 Flanges896041316
ANSI 300 Flanges956741316
ANSI 600 Flanges956741316
ANSI 900 Flanges1218341922
ANSI 1500 Flanges1218341922
ISO 7005 (DIN) FlangePN6 Flanges80554M1011
PN10 Flanges95654M1214
PN16 Flanges95654M1214
PN20 Flanges9060.54M1416
PN25 Flanges95654M1214
PN40 Flanges95654M1214

Pressure Rating Of Monel 400/ K500 Flanges

Temp. ℃Pressure-ASME temperature rating for B16.47  by class, bar   
 75150300400600900
-29 to 3810.020.051.768.9103.4155.1
509.819.551.768.9103.4155.1
1008.817.750.767.5101.3152.0
1507.915.845.961.291.9137.8
2006.913.842.756.985.3128.0
2506.012.140.553.980.9121.4
3005.110.238.951.877.7116.6

industrial use flanges for Monel 400/ K500 Flanges

Price Of Monel 400/ K500 Flanges

High Nickel Alloys Forged FlangesUSD $8.10 - $20.20 / Piece (FOB Price) on request
High Nickel Alloys Blind FlangesUSD $8.10 - $20.20 / Piece (FOB Price) on request
High Nickel Alloys Slip On FlangeUSD $8.10 - $20.20 / Piece (FOB Price) on request
High Nickel Alloys Socketweld FlangesUSD $8.10 - $20.20 / Piece (FOB Price) on request
High Nickel Alloys Long Weld Neck FlangesUSD $8.10 - $20.20 / Piece (FOB Price) on request

Application Of Monel 400/ K500 Flanges

We make sure that our every product is made of high quality raw material. We thoroughly test each and every product before dispatching it to our customers.

Testing Of Monel 400/ K500 Flanges

We known for its accurate and perfect dimensions. We thoroughly test all our products before shipping them to the customers. We carry out destructive as well as non-destructive tests on all our products.

Packing Of Monel 400/ K500 Flanges

We uses the most safest and the most effective ways of packaging for all types of deliveries. We pack our goods in various ways such as: